Flatcam

| Parameter | Value | |-----------|-------| | CNC Machine | [e.g., 3018 Pro, Othermill] | | Controller | [e.g., Grbl 1.1, TinyG] | | Units | mm / inches (select one) | | Origin | Bottom-left corner | | Z Safe Height | 5.0 mm | | Feed Rate (XY) | 300 mm/min | | Plunge Rate (Z) | 60 mm/min |

| Check | Result | Notes | |-------|--------|-------| | Gerber alignment | ✔ Pass | Drill-to-copper registration within 0.05 mm | | Missing traces | ✔ None | All nets isolated | | Tool lift collisions | ✔ None | Z safe height verified | | Board edge clearance | ✔ Pass | >1.5 mm from copper to edge | | Simulated in CAMotics | ✔ Pass | No over-travel or fixture hits | flatcam

Unlike a standard camera where light passes through a lens to form a direct image on a sensor, FlatCam uses an or coded aperture . | Parameter | Value | |-----------|-------| | CNC

In the world of DIY electronics and desktop manufacturing, the gap between a digital design and a physical circuit board is bridged by a specific type of software: the CAM (Computer-Aided Manufacturing) processor. For hobbyists and professionals using CNC mills or laser cutters to create PCBs, has become the industry standard open-source solution. Othermill] | | Controller | [e.g.