To successfully process 3301 PA Nylon, specific drying and molding parameters must be observed:
. It is engineered for industrial-grade parts that require a balance of high strength, impact resistance, and thermal stability. JLC3DP +3 Key Technical Specifications Property Value Material Technology Selective Laser Sintering (SLS) Tensile Strength ~45 MPa Tensile Modulus ~1,700 MPa Heat Deflection Temp (HDT) 140°C to 179°C (dependent on load/conditions) Elongation at Break ~35% Surface Texture Grainy/Matte Color White Design Guidelines To ensure successful prints with 3301PA Nylon, follow these design standards recommended by JLC3DP and ChanHonTech : Minimum Wall Thickness
| Material | Stiffness | Elongation | Impact | Best Use Case | | :--- | :--- | :--- | :--- | :--- | | | Low | Very High | Excellent | Hinges, clips, durable housings | | PA12 (e.g., 3200PA) | Medium | Medium | Good | General-purpose, rigid prototypes | | Alumide (PA12 + Al) | High | Low | Low | Stiff, metal-like appearance | 3301pa nylon
3301PA is engineered to withstand demanding environments that would cause standard plastics to warp or fail. Test Method ISO 527-1:2019 Tensile Modulus ISO 527-1:2019 Flexural Modulus ISO 527-1:2019 Elongation at Break ISO 527-1:2018 Heat Deflection Temp (0.45 MPa) 147°C to 179°C ISO 78-1:2020 Powder Melting Point ISO 11357-1:2020 Impact Strength (Unnotched) ISO 180:2019 Key Advantages of 3301PA
With a heat deflection temperature reaching up to 179°C under low-load conditions, it maintains its shape in high-heat environments like engine bays or electronic enclosures. To successfully process 3301 PA Nylon, specific drying
Unlike more brittle resins, 3301PA absorbs energy, making it resistant to cracking upon impact or repeated stress.
is a high-performance, bio-based Polyamide 11 (PA 11) powder specifically engineered for Selective Laser Sintering (SLS) 3D printing. It is produced by 3D Systems (part of their DuraForm ProX series). Unlike PA 12 (petrochemical-based), PA 11 is derived from renewable castor oil, offering a unique balance of mechanical toughness and environmental compliance. Test Method ISO 527-1:2019 Tensile Modulus ISO 527-1:2019
is a high-performance engineering thermoplastic belonging to the polyamide family. It is typically classified as an unmodified, medium-viscosity, lubricated Nylon 6 material.