Wake — Up On Lan Anydesk __link__

If your AnyDesk Wake-on-LAN configuration is not working, first verify that the target machine is in the correct power state. WoL generally works when the computer is in "Sleep" or "Hibernate" mode; it rarely functions if the PC is completely powered off (Soft-Off state) unless specifically configured in the BIOS for "Wake on PCI-E." Ensure the network adapter drivers are up to date and that "Green Ethernet" or "Energy Efficient Ethernet" settings are disabled in the adapter properties, as these features can power down the network port completely, preventing the "magic packet" from reaching the PC. Finally, ensure your router is not blocking UDP ports typically used for WoL (usually port 9 or port 7), and that the AnyDesk client on the controlling side has a valid license registered.

This online "helper" device sends a containing the target machine's unique MAC address.

Unlike traditional WoL, which often requires complex port forwarding, AnyDesk uses a . To wake a sleeping device (Client R) from a different network: You send a "Power On" request from your local device. wake up on lan anydesk

⚠️ The exact name varies by motherboard manufacturer.

Write both down.

AnyDesk's Wake-on-LAN (WoL) feature allows users to remotely turn on a computer that is sleeping, hibernating, or powered off (shut down) from another device within the same network . This feature enables remote access without requiring the target computer to run continuously, which is ideal for energy-saving, remote work, or accessing high-performance office workstations from home. AnyDesk +2 How AnyDesk Wake-on-LAN Works The "Magic Packet": When you click "Power On" in AnyDesk for a sleeping device, a special "Magic Packet" is sent to the network. This packet contains the MAC address of the target machine, which instructs it to turn on. Helper Device Method: AnyDesk requires at least one other device (like a server or another PC) to be running and online on the same local network as the target machine. This helper device receives the command from your remote location and sends the wake-up signal directly within the network. Supported States: Supports waking from S5 (Shutdown), hybrid shutdown, and sleep mode. AnyDesk +4 Key Setup Requirements To use WoL with AnyDesk, you must configure the remote computer to allow network signals to wake it: 10 sites Remote Access Wake-on-LAN Explained - AnyDesk Dec 16, 2025 —

Master Guide: Wake Up on LAN with AnyDesk Remote access is essential for modern work, but leaving your computer running 24/7 is neither energy-efficient nor secure. is a networking standard that allows a computer to be turned on or awakened by a network message . AnyDesk simplifies this process by acting as a bridge, allowing you to power on a remote machine with a single click. How AnyDesk Wake-on-LAN Works If your AnyDesk Wake-on-LAN configuration is not working,

| Problem | Likely Fix | |--------|-------------| | Won’t wake after sleep | Check BIOS → enable “Wake on PCIe” / “Resume by LAN” | | Works on LAN, not internet | Need port forwarding or router-based WOL | | MAC address changes | Use static IP + ARP binding in router | | Wi-Fi doesn’t work | Switch to Ethernet – WOL over Wi-Fi is unreliable |

The integration of WoL and AnyDesk offers a range of features and functionality, including: This online "helper" device sends a containing the

If the PC is on the , it will wake immediately. For over the internet , see advanced section below.