: The drum remains full of water after the cycle finishes.
Got questions? Drop them in the comments—we’ve unclogged everything from LEGO men to guitar picks over here.
With the power off and most of the water drained, it’s time to open the filter housing. how to unclog washer drain pump
The drum should drain fully within 2–3 minutes. Success? Then you’re done.
Expect more water to trickle out. Keep your towel handy. : The drum remains full of water after the cycle finishes
Also check the (the small fan-like blades just behind the filter). Spin it gently with your finger—it should rotate freely. If it’s stuck, pry out whatever jammed it.
Reach in with your fingers (or needle-nose pliers if you are squeamish) and pull out the debris. Spin the little fan-like wheel (the impeller) inside the hole with your finger. It should spin freely and make a clicking or rattling sound. If it's stuck, you haven't found the obstruction yet—keep digging. With the power off and most of the
Pro tip : Use needle-nose pliers to grab slippery debris.
Before you resign yourself to buying a new machine or calling a plumber, take a breath. In 80% of front-loading washers and many top-loaders, the culprit is a simple clog in the drain pump filter. This is the "appendix" of the washing machine—a small trap designed to catch foreign objects before they destroy the pump impeller.
The debris is gone. The impeller spins. It’s time to reassemble.
Run a "Drain & Spin" cycle or a "Rinse" cycle. Do not add clothes or detergent yet. Stand there and watch. Listen.