Change the oil and filter after the first 25 hours of operation.
Simulate a power outage by tripping the main breaker to ensure the ATS transfers the load seamlessly within 10 seconds. Maintenance for Longevity
Always use the provided flexible fuel line connector to attach the rigid pipe to the generator to absorb engine vibration. Electrical Connections and the ATS kohler 26kw installation manual
Install on a extending 6 inches beyond the unit on all sides, or use an approved gravel bed.
Do not install directly on grass, wood, or combustible materials. : Change the oil and filter after the first
Wiring should be routed through PVC conduit (e.g., 1 1/2" for power and 3/4" for control).
Once the mechanical and electrical connections are secure, you must follow the manual's "First Time Run" sequence. Electrical Connections and the ATS Install on a
Use the sizing charts in the manual to account for the distance between the meter and the generator. Undersized piping is the most common cause of "fail to start" errors.
Note: This is a draft created for informational purposes. Always refer to the official Kohler installation manual (TP-XXXX) for your specific model, serial number, and local codes.
Maintain at least of clearance from the exhaust end to any windows, vents, or doors.