Working Insinkerator Fix — Garbage Disposal Not

If the red reset button didn't work and there is no hum, the unit might not be receiving electricity.

Once the shaft moves freely, look down the drain with a flashlight and remove the obstruction with tongs. 3. Check the Power Source

Disconnect the bolts holding the discharge pipe to the side of the disposal. garbage disposal not working insinkerator

If the disposal makes no sound at all when you flip the switch, the internal circuit breaker has likely tripped to prevent the motor from overheating.

: If water is dripping from the bottom of the motor housing, the internal seals have failed. This is usually not repairable. If the red reset button didn't work and

: Always use cold water while grinding to keep grease solid so it can be chopped and flushed away.

If you flip the switch and you hear a low, humming sound—but the blades don't spin—turn the switch . This hum indicates the motor is trying to turn against a jam and is in danger of overheating. Check the Power Source Disconnect the bolts holding

This guide covers the most common troubleshooting steps to get your InSinkErator back in action. Safety First

: Occasionally grind lemon or orange peels to freshen the unit and break up slime.

: Once free, use tongs (never your hands) to reach into the sink and pull out any hard objects (bones, fruit pits, or metal). 3. Clear a Drain Clog (Water backing up)