Branchement Interrupteur Volet Roulant Teleco [2021] Review

Connectez la Phase (L) et le Neutre (N) du secteur sur les bornes d'entrée du récepteur.

:

The wiring for a Teleco roller shutter switch (or motor connected to a Teleco control unit) follows a standard industrial color code. Whether you are connecting a direct manual switch or a Teleco control panel like the Teleco Simple , the primary goal is to manage the phase for the up and down commands while ensuring a common neutral. General Wiring Principles A standard wired shutter motor typically has four wires that must be connected correctly to the switch or control unit: Blue (Neutral): This is the common return for the motor and must be connected to the neutral from your power supply (often via a Wago or terminal block). Green/Yellow (Earth): Connects to the ground terminal of your home’s electrical system for safety. Brown (Direction 1): Often used for the "Down" or "Up" command depending on the motor’s orientation. Black (Direction 2): Used for the opposite command (e.g., if Brown is Up, Black is Down). Wiring a Teleco Control Panel (e.g., branchement interrupteur volet roulant teleco

Voici un résumé technique structuré comme un "papier" (guide pratique) sur le branchement d'un interrupteur pour volet roulant avec récepteur de télécommande (souvent appelé "modules-fil pilote" ou "récepteurs muraux"). Connectez la Phase (L) et le Neutre (N)

Pour un moteur de volet roulant standard à 4 fils, le câblage suit une logique de couleurs universelle que l'on retrouve sur les modules Teleco : General Wiring Principles A standard wired shutter motor