Unblock Insinkerator Garbage Disposal - How To

: Flip the wall switch to "OFF" and unplug the unit from the outlet under the sink. If it is hardwired, turn off the circuit breaker at the main panel to ensure it cannot accidentally activate.

Unblocking an InSinkErator garbage disposal is usually a straightforward process that involves clearing a jam in the grinding chamber or resetting the motor. Important Safety Information Turn Off Power: Always turn off the wall switch and, if possible, unplug the unit or turn off the circuit breaker before attempting repairs. Do Not Use Chemicals: Avoid using harsh chemical drain cleaners, as they can damage the disposal and pipes. Never Use Hands: Do not put your hands inside the disposal. Use tongs or pliers to remove objects. Support Home Page +3 Method 1: Using the "Wrenchette" (Best for Jams) Most InSinkErator units come with a small, self-service wrench (often called a "wrenchette" or 1/4-inch Allen wrench). Support Home Page Locate the Hole: Find the hole in the center of the bottom of the disposal unit under the sink. Insert Wrench: Insert the wrench into the hole. Rotate: Work the wrench back and forth (clockwise and counter-clockwise) until it turns freely in a full circle. Remove Debris: Remove the wrench, turn on the power, and check for any dislodged objects from inside the sink with tongs. Support Home Page +2 If you lost the wrench, a broom handle can also be used to pry the impellers back and forth, or a 1/4-inch Allen wrench from a hardware store will work. The Home Depot +1 Method 2: Pressing the Reset Button (Best for Humming) If the motor hums but does not spin, it may have overloaded and tripped the thermal protector. YouTube Find the Button: Locate the small red square button on the bottom of the disposal unit. Press the Button: Push the red button in. If it was tripped, it will stay in. Wait: If it doesn't stay in, wait 10–20 minutes for the motor to cool down and try again. Support Home Page +1 Method 3: Unclogging a Drain Blockage If the disposal is spinning but water is not draining: 10 sites Home Fixing a Jammed Garbage Disposal IMPORTANT * Turn off disposer and water. * Insert one end of wrenchette into center hole on bottom of disposer. Work wrenchette ba... Support Home Page how to unblock insinkerator garbage disposal

(curved pipe under sink):

For more detailed troubleshooting, you can refer to the official InSinkErator Support Page or technical guides from retailers like Webstaurant Store . If you’d like, I can help you: : Flip the wall switch to "OFF" and

: Harsh chemicals can erode the metal components of your disposal and damage your pipes. Step-by-Step Guide to Unblocking an InSinkErator 1. Clear Visible Obstructions Important Safety Information Turn Off Power: Always turn

: Locate the small red square button on the bottom or side of the unit. If the disposal overheated or jammed, this button will be popped out by about 1/4 inch. Push it back in until it clicks.

Recommend a if these steps don't resolve the humming. Home Fixing a Jammed Garbage Disposal