Cooling Load Check Figure

| Building Type | Standard Range (sq ft/ton) | Standard Range (m²/kW) | | :--- | :--- | :--- | | | 500 – 700 sq ft/ton | 13 – 18 m²/kW | | Residential (High Performance) | 1,000+ sq ft/ton | 26+ m²/kW | | Office Buildings | 250 – 400 sq ft/ton | 6.5 – 10.5 m²/kW | | Retail / Shops | 250 – 350 sq ft/ton | 6.5 – 9 m²/kW | | Server Rooms / Data Centers | 50 – 150 sq ft/ton | 1.5 – 4 m²/kW | | Restaurants (Dining) | 150 – 250 sq ft/ton | 4 – 6.5 m²/kW |

A (often referred to as a "Rule of Thumb" or "Benchmark") is a critical metric used to verify that a calculated cooling load is reasonable before purchasing equipment. cooling load check figure

Cooling requirements vary significantly based on building use, occupancy density, and internal heat gains. Below are typical ranges derived from ASHRAE guidelines and industry standards. Building Classification Typical Load ( Area per Ton ( 80 – 120 400 – 600 General Office (Interior) 100 – 130 300 – 400 Retail/Department Stores 125 – 150 250 – 350 Restaurants/Fast Food 250 – 350 100 – 200 Hospitals (Patient Rooms) 110 – 140 250 – 350 Libraries/Museums 120 – 150 250 – 300 Computer/Server Rooms 400 – 600+ 50 – 100 Factors Influencing Your "Check Figure" | Building Type | Standard Range (sq ft/ton)

A single number cannot account for every variable, so designers must adjust their expectations based on: www.engproguides.comhttps://www.engproguides.com HVAC Rule of Thumb Calculator - Engineering Pro Guides Building Classification Typical Load ( Area per Ton

: Estimating equipment size and budget during the conceptual design phase.