To reset a printer (often needed after ink refill, error clearing, or unrecognized cartridge issues), try these steps:
Locate the Stop/Reset button (the circle with the inverted triangle). Press and hold this button for at least 5 to 10 seconds.
This "resets" the ink counter for that specific cartridge, allowing you to print again. Hard Reset: Entering Service Mode canon mg2550s reset
The power light should blink for a moment and then stay solid. The printer is now in Service Mode and can be reset using a Canon Service Tool software on your PC. Resetting the Waste Ink Absorber
the power cord from the wall outlet while the printer is still on. Wait at least 60 seconds. Reconnect the power cord directly to a wall outlet. To reset a printer (often needed after ink
Release the button (keep holding the Power button). Press the Stop/Reset button 5 times in quick succession.
Hi everyone,
A photo of a hand unplugging the power cord from the back of a Canon printer, or a close-up of the MG2550S button panel with the power button highlighted.
If you are getting an , you might need to check for jammed paper or dirty encoder strips rather than just resetting! Hard Reset: Entering Service Mode The power light
It happens to the best of us. You try to print, and suddenly you're hit with the infamous "Support Code" errors or the ink lights just won't stop blinking. Before you go shopping for a new printer, try a hard reset on your Canon MG2550S.