Vsif Hdmi ((new)) -

=>The VSI port of Intel HDMI IP represents the VSIF of HDMI spec. Intel HDMI IP only have the fixed VSIF info (24-bit IEEE registr... Altera Community Vendor Specific InfoFrame (VSIF) for FX-Direct FX-Direct is a protocol which embeds lower resolution video formats in a higher resolution container.The primary use case is sendi... Pixel FX AUX Packets - 1.2 English - PG351 - AMD Technical Information Portal HDMI 2.1 Receiver Subsystem v1. 2 Product Guide (PG351) ... For HDMI, all data island packets consist of a 4-byte packet header an... AMD Vendor Specific InfoFrame (VSIF) for FX-Direct The encoding device needs to be set to 1080p and nearest-neighbor scale the 480i field to the max integer size that fits in the 10... Pixel FX Supported Video Signal Info Reports - NI - National Instruments HDMI Infoframe. The HDMI Infoframe is a CEA-861 vendor-specific Infoframe containing a 24-bit IEEE Registration Identifier of 0x00... National Instruments 3D Features of the HDMI 1.4 Format - Key Digital Transmitting the 3D signal to the TV: 1. Frame Packing Method. This method describes the left and right image packed into alternat... Key Digital Making sense out of HDMI 1.4 Performance and the CEAs 861 ... Mar 26, 2010 —

VESA and HDMI LA are also exploring to support full 64KB DisplayID over several VSIF packets.

// IEEE OUI for HDMI Forum (used for HDR metadata) // Note: Transmitted LSB first on the wire. #define HDMI_OUI_HF 0xC4, 0x5D, 0xD8 vsif hdmi

: VSIFs are mandatory when a source device transmits 4K (Ultra HD) or 3D video formats.

: Each VSIF consists of a 4-byte header and a 28-byte payload. =>The VSI port of Intel HDMI IP represents

// 3. Set IEEE OUI for HDMI Forum (HDR requires HDMI Forum OUI) // OUI 0xD8C45D -> transmitted as 5D C4 D8 (Wait, standard is C4 5D D8 in hex representation, wire is LSB first) // HDMI Forum OUI is 0xC45DD8. // Wire order (LSB first): 0xD8, 0x5D, 0xC4. packet->oui[0] = 0xD8; packet->oui[1] = 0x5D; packet->oui[2] = 0xC4;

// 5. Copy Metadata if (meta_len > 0 && meta_len <= 24) memcpy(packet->metadata, metadata, meta_len); Pixel FX AUX Packets - 1

It sounds like you are looking for a good implementation or example for HDMI.

// 4. Set Packet Type / Configuration // For HDR10 Extended Metadata: // Format (bits 7:5) = 0 // Length (bits 4:0) = meta_len (e.g., 24) packet->packet_type = meta_len;