Factory Reset Dahua Nvr

Download and install Dahua ConfigTool on a Windows PC on the same network as the NVR.

: While holding the reset button, power on the NVR.

: The NVR will restart and begin the factory reset process. This may take a few minutes. Do not power off the device during this process. factory reset dahua nvr

Open a web browser (Internet Explorer or Chrome with IE mode is recommended for older firmware) and enter the NVR's IP address. Login: Enter your admin credentials.

Reassemble the case, power on the NVR. Step 6: The NVR will boot as if new. You will need to run the Setup Wizard and create a new admin password. Download and install Dahua ConfigTool on a Windows

Best for: Password recovery without physical disassembly.

Some older or very budget-friendly Dahua models do not have a physical reset button. In these cases, you must use the "Forgot Password" link on the login screen to receive a security code via email. This may take a few minutes

Use this method if you have access to the administrator account.